ড. মুহাম্মদ শরীফুল ইসলামের প্রতিকৃতি

প্রফেসর ড. মুহাম্মদ শরীফুল ইসলাম

উপ-উপাচার্য, বাংলাদেশ প্রকৌশল বিশ্ববিদ্যালয় (বুয়েট)
অধ্যাপক, পুরোকৌশল বিভাগ, বুয়েট

প্রকাশনা

১৯৫+মোট প্রকাশনা
২,৪৪৫+সাইটেশন
২৭h-ইনডেক্স
৬১i10-ইনডেক্স

Google Scholar ResearchGate ORCID 0000-0001-9620-2413

আপনার অনুসন্ধানের সাথে মিলে এমন কোনো প্রকাশনা নেই।

বই, নলেজ প্রোডাক্ট ও কোড 14

  • Islam, M.S. (2026). “Vetiver-based Bioengineering for Slope Stabilization: A Practical Guideline for Bangladesh.” Dhaka, Bangladesh, ISBN: 978-984-35-9304-7.
  • Islam, M.S., Aninda, S.S., Paul, S., Sakib, M.M.N., Progga, S.T., and Ananna, A.N. (2026). “Bangladesh Standard: Compressed Stabilized Earth Block (CSEB).” Bangladesh Standards and Testing Institution (BSTI), Ministry of Industries, Dhaka, Bangladesh.
  • Islam, M.S. (2025). “Standard Specifications for Slope Stabilization Using Vetiver Grass.” 1st Edition, The Vetiver Network International (TVNI), USA, ISBN: 979-8-218-90379-4.
  • Islam, M.S., Kawshiq, A.S.M.K.Z., Progga, S.T., Islam, M.M. (2024). “Effectiveness of Vetiver-based Bioengineering in Combination with Recycled Plastic Pin (RPP) for Steep Embankment Stabilization.” Ha-Minh et al. (Eds), CIGOS 2024, Book Chapter, 89, pp. 799-806.
  • Islam, M.S. (2024). “Road Embankment Protection using Bioengineering in Indonesia.” Proposed Trans South-South Java Road Project of Asian Development Bank (under review).
  • Asian Development Bank, ADB (2022). “Soil Bioengineering for Infrastructure Development in Cambodia: A Study on Vetiver and Liquid Soil Catalysts for Road Projects.” Southeast Asia Transport Project Preparatory Facility, Integrated Road Network Improvement Project Preparation, Asian Development Bank. [Islam, M.S. conceptualized the idea, prepared the Final Report of the project, and assisted in preparing the Knowledge Product based on the Final Report].
  • Islam, M.S., Progga, S.T. and Hossain, T.R. (2023). “Sustainable Operation and Maintenance of Multi-purpose Disaster Shelter of Bangladesh.” In Book: 5th World Congress on Disaster Management (5th WCDM), November 24-27, 2021, Delhi, India, Vol. 1, Chapter 36, Paper No. 437, pp. 322-331, 1st Edition, Taylor & Francis.
  • Islam, M.S., Latif, M.B., Islam, T. (2022). “Bioengineering Technique for Protecting Submersible Roads in Haor Districts of Bangladesh.” In Book: El-Askary, H., Erguler, Z.A., Karakus, M., Chaminé, H.I. (eds) Research Developments in Geotechnics, Geo-Informatics and Remote Sensing. CAJG 2019. Advances in Science, Technology & Innovation. Springer, Cham.
  • Nko’O, C.B., Cauderay, E., Hosta, J., Moles, O., Rakotomamonjy, B., Munoz, Gutiérrez, E.S., Islam, M.S., Hossain, T.R. and Podder, K. (2020). “Disaster Resilient Low-cost Houses: Capitalization of Methods, Activities and Results, 2007-2018.” CRAterre Editions, France [ISBN (print): 979-10-96446-32-2 (English), ISBN (version imprimée): 979-10-96446-30-8 (French)].
  • Islam, M.S., Yasin, S.J.M., Abedin, M.Z., Siddique, A. (2010). “Proceedings of the Bangladesh Geotechnical Conference 2010: Natural Hazards and Countermeasures in Geotechnical Engineering.” November 4-5, 2010 in Dhaka, Bangladesh organised by Bangladesh Society for Geotechnical Engineering (BSGE) in Association with International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE), (ISBN: 978-984-33-2180-0, print).
  • Ahsan, R., Islam, M.S., Shahriar, A., Noor, M.A. and Al-Hussaini, T.M. (2010). “Proceedings of the Third International Earthquake Symposium, Bangladesh (IESB-3).” March 5-6, 2010 organised by the Department of Civil Engineering, BUET and Bangladesh Earthquake Engineering Society (BES), Dhaka, Bangladesh, (ISBN: 978-984-8725-01-6, print).
  • Siddique, A., Ali, M.H., Islam, M.S., and Islam, M.M. (2002). “Evaluation of Performance of Rajshahi Town Protection Embankment.” Engineering Concerns of Floods, Ali, Seraj and Ahmad Editors, Bangladesh Univ. of Engineering and Technology, pp. 115-130.
  • Ameen, S.F., Siddique, A., Islam, M.K. and Islam, M.S. (2020). “Chapter 3: Soils and Foundation, Bangladesh National Building Code, BNBC.” House Building Research Institute, HBRI.
  • Journal of Geotechnical Engineering, Vol. 1 (2011), Editors: A. Siddique, T.M. Al-Hussaini, M.S. Islam, published by Bangladesh Society for Geotechnical Engineering (BSGE), Bangladesh, Vol.1, December, 2011 (Online version: http://bsge-bd.org/bsge_alpha/index.php).

জার্নাল পেপার 58

  • Majumder, J., Paul, S. and Islam, M.S. (2026). “Optimization of micromechanical properties of compressed stabilized earth blocks using cement and sewage sludge ash.” Journal of Materials in Civil Engineering, ASCE, Vol. 38, No. 7.Q1
  • Huda, KMN, and Islam, M.S. and Paul, S. (2026). “Strength, durability, and life cycle assessment of compressed stabilized earth blocks with ceramic waste powder.” Construction and Building Materials, Vol. 521, Article No. 146076.Q1
  • Sikder, T., Paul, S. and Islam, M.S. (2026). “Utilization of fly ash and sewage sludge ash based geopolymer with cement for the production of compressed stabilized earthen block.” European Journal of Environmental and Civil Engineering, Vol. 30, Issue No. 1, Article No. 2618000.Q2
  • Islam, M.S., Aninda, S.S., Islam, M.S. and Islam, M.K. (2026). “Load–transfer model calibration for pile foundations in deltaic soil profiles.” Geotechnical and Geological Engineering, Vol. 44, Article No. 79.Q2
  • Paul, S., Islam, M.M. and Islam, M.S. (2026). "Sustainable stabilization of expansive clay using lime and steel slag." Advances in Materials Science and Engineering, 2026, Art. 2024022.
  • Kabir, M.U., Aninda, S.S., Islam, M.S., and Zahid, C.Z.B. (2025). “Analysis of pile load-settlement prediction using finite element method and deep neural network.” Engineering Research Express, Vol. 7, Article No. 045137.Q2
  • Paul, A., Islam, M.S., Jotisankasa, A. and Progga, S.T. (2025). “Influence of rainfall infiltration and hydraulic conductivity on hill slope stability.” Geotechnical and Geological Engineering, Vol. 43, Article No. 300.Q2
  • Paul, S. and Islam, M.S. (2025). “Sustainable stabilisation of expansive subgrade soil using bio-stimulation based microbially induced calcite precipitation process and waste fibre reinforcement.” Road Materials and Pavement Design, Vol. 27, Issue No. 4, pp. 1012-1060.Q1
  • Mallick, J.R. and Islam, M.S. (2025). “Characteristics of compressed stabilized earth block fabricated with sawdust ash based geopolymer.” Journal of Building Engineering, Vol. 101, Article No. 111840.Q1
  • Tarannum, I., Aninda, S.S., Paul, S. and Islam, M.S. (2025). “Suitability of permeation grouting in enhancing the mechanical properties of alluvial sand in the Ganges-Brahmaputra-Meghna Delta, Bangladesh.” Indian Geotechnical Journal, Vol. 55, pp. 1594-1612.Q2
  • Paul, S., Islam, M.S., and Chakma, N. (2024). “Effectiveness of areca fiber and cement on the engineering characteristics of compressed stabilized earth blocks.” Construction and Building Materials, Vol. 427, Article No. 136290.Q1
  • Paul, S., Islam, M.S., and Hossain, M.I. (2023). “Suitability of Vetiver straw fibers in improving the engineering characteristics of compressed earth blocks.” Construction and Building Materials, Vol. 409, Article No. 134224.Q1
  • Aninda, S.S. and Islam, M.S. (2023). “Effectiveness of waste concrete powder in fabricating compressed stabilized earth blocks: Strength, durability and thermal assessment.” Journal of Building Engineering, Vol. 80, Article No. 107989.Q1
  • Islam, S., Islam, M.S., Elahi, T.E. and Khan, A.J. (2023). “Creep response of untreated and additive treated jute geotextiles in isothermal condition.” Geotechnical and Geological Engineering, Vol. 41, pp. 4095-4118.Q2
  • Paul, S., Islam, M.S. and Elahi, T.E. (2023). “Potential of waste rice husk ash and cement in making compressed stabilized earth blocks: Strength, durability and life cycle assessment.” Journal of Building Engineering, Vol. 73, Article No. 106727.Q1
  • Aziz, S. and Islam, M.S. (2023). “Erosion and runoff reduction potential of vetiver grass for hill slopes: A physical model study.” International Journal of Sediment Research, Vol. 38, Issue No. 1, pp. 49-65.Q1
  • Kabir, M.U., Islam, M.S., Nazrul, F.B., Shahin, H.M. (2023). “Comparative stability and behaviour assessment of a hill slope on clayey sand hill tracts.” International Journal of Engineering Trends and Technology, Vol. 71, Issue No. 1, pp. 11-24.Q4
  • Aziz, S. and Islam, M.S. (2022). “Mechanical effect of vetiver grass root for stabilization of natural and terraced hill slope.” Geotechnical and Geological Engineering, Vol. 40, pp. 3267-3286.Q2
  • Islam, T. and Islam, M.S. (2022). “Submergence and wave action resilience of vetiver grass protected fly ash amended soil slopes.” Geotechnical and Geological Engineering, Vol. 40, pp. 3643-3668.Q2
  • Paul, S., Islam, M.S. and Elahi, T. (2022). “Comparative effectiveness of fibers in enhancing engineering properties of earth as a building material: A review.” Construction and Building Materials, Vol. 332, Article No. 127366.Q1
  • Elahi, T.E., Islam, M.A. and Islam, M.S. (2022). “Parametric assessment of soil nailing on the stability of slopes using numerical approach.” Geotechnics, Vol. 2, Issue No. 3, pp. 615-634.
  • Alam, M.K., Islam, N., Abedin, M.Z., Islam, M.S., Dey, R. and Valsangakar, A.J. (2022). “Prediction of compressibility and shear strength behaviour of in-situ cohesive soil from reconstituted clay.” International Journal of Geotechnical Engineering, Vol. 16, No. 6, pp. 655-669.Q2
  • Islam, M.A., Islam, M.S. and Jeet, A.A. (2021). “A geotechnical investigation of 2017 Chattogram landslides.” Geosciences, Vol. 11, Issue No. 8, Article No. 337.
  • Hoque, I.L., Islam, M.S. and Hoque, E. (2021). “Effect of vetiver root on triaxial shear strength of a cohesionless soil.” Geomechanics and Geoengineering, Vol. 17, Issue No. 3, pp. 857-871.Q2
  • Elahi, T.E., Shahriar, A.R. and Islam, M.S. (2021). “Engineering characteristics of compressed earth blocks stabilized with cement and fly ash.” Construction and Building Materials, Vol. 277, Article No. 122367.Q1
  • Islam, M.S., Islam, T. and Khatun, N. (2021). “Permeability alteration of low plastic clay and poorly graded sand using lime and fly ash.” Indian Geotechnical Journal, Vol. 51, Issue No. 5, pp. 967-978.Q3
  • Islam, M.A., Islam, M.S., Chowdhury, M.E. and Badhon, F.F. (2021). “Influence of vetiver grass (Chrysopogon zizanioides) on infiltration and erosion control of hill slopes under simulated extreme rainfall condition in Bangladesh.” Arabian Journal of Geosciences, Vol. 14, Article No. 119.Q2
  • Badhon, F.F., Islam, M.S. and Islam, M.A. (2021). “Contribution of vetiver root on the improvement of slope stability.” Indian Geotechnical Journal, Vol. 51, Issue No. 4, pp. 829-840.Q3
  • Badhon, F.F., Islam, M.S., Islam, M.A. and Arif, M.Z.U. (2021). “A simple approach for estimating contribution of vetiver roots in shear strength of a soil-root system.” Innovative Infrastructure Solutions, Vol. 6, Article No. 96.Q2
  • Alam, M.K., Shahriar, A.R., Islam, M.S., Islam, N. and Abedin, M.Z. (2021). “Experimental investigation on the strength and deformation aspects of thixotropic aging in reconstituted clays.” Geotechnical and Geological Engineering, Vol. 39, pp. 2471-2486.Q2
  • Chowdhury, M.E., Islam, M.S., Alam, T., Barua, S., Shahriar, M.S., Anisa, H. (2021). “Infiltration in vegetated soil: empirical modeling and sensitivity analysis.” Modelling Earth Systems and Environment, Vol. 7, pp. 547-559.Q2
  • Islam, M.S., Elahi, T.E., Shahriar, A.R. and Mumtaz, N. (2020). “Effectiveness of fly ash and cement for compressed stabilized earth block construction.” Construction and Building Materials, Vol. 255, Article No. 119392.Q1
  • Elahi, T.E., Shahriar, A.R., Islam, M.S., Mehzabin, F. and Mumtaz, N. (2020). “Suitability of fly ash and cement for fabrication of compressed stabilized earth blocks.” Construction and Building Materials, Vol. 263, Article No. 120935.Q1
  • Islam, M.S., Elahi, T.E., Shahriar, A.R. Nahar, K., and Hossain, T.R. (2020). “Strength and durability characteristics of cement-sand stabilized earth blocks.” Journal of Materials in Civil Engineering, ASCE, Vol. 32, Issue No. 5, pp. 04020087-1-15.Q1
  • Shahriar, A.R., Islam, M.S. and Jadid, R. (2020). “Ultimate pullout capacity of vertical anchors in frictional soils.” International Journal of Geomechanics, ASCE, Vol. 20, Issue No. 2, pp. 04019153-1-19.Q1
  • Chowdhury, M.E., Islam, M.A., Islam, M.S., Shahriar, M.S. and Alam, T. (2018). “Development and calibration of a portable artificial rainfall simulator for reproducible experiments on soil erosion.” Global Science and Technology Journal, Vol. 6, No. 2, pp. 47-63.
  • Nasrin, S. and Islam, M.S. (2018). “A model study on erosion control of embankment by vegetation.” Fareast Int. University Journal, Vol. 01, Issue No. 01, pp. 60-71.
  • Siddiquee, M.S.A., Islam, M.S., Tatsuoka, F. and Islam, M.K. (2018). “An anisotropic model for granular material based on experiments.” Geotechnical and Geological Engineering, Vol. 36, pp. 1447-1462.Q2
  • Azam, F., Islam, M.S. and Shahin, H.M. (2016). “Study on tunneling for underground metro rail system in Dhaka city.” International Journal of GEOMATE, Geotech., Const., Mat., Env., Japan, Vol. 10(2), pp. 1776-1783.Q3
  • Ahmed, S.S., Hossain, N., Khan, A.J. and Islam, M.S. (2016). “Prediction of soaked CBR from index properties and unsoaked CBR of lean clay.” Malaysian Journal of Civil Engineering, Vol. 28, No. 2, pp. 270-283.
  • Choudhury, M.R., Islam, M.S., Ahmed, Z. and Parshi, F.N. (2016). “Phytoremediation of heavy metal contaminated Buriganga riverbed sediments using Indian Mustard and Marigold plants.” Environmental Progress & Sustainable Energy, American Institute of Chemical Engineers (AIChE), Vol. 35, Issue No. 1, pp. 117-124.Q2
  • Islam, M.S., Hossain, M.S., Banik, S., and Azam, F. (2014). “Elasto-plastic constitutive model parameters and their application to bearing capacity estimation for Dhaka sub-soil.” Journal of Civil Engineering, The Institution of Engineers, Bangladesh (IEB), Vol. CE 42, No. 2, pp. 171-188.
  • Khan, A.J., Islam, M.S., Saiful, S.S. (2014). “Laboratory assessment of soil-jute geotextile interaction behaviour.” Electronic Journal of Geotechnical Engineering (EJGE), Vol. 19, pp. 3949-3962.
  • Moles, O., Caimi, A., Islam, M.S., Hossain, T.R. and Podder, R.K. (2014). “From local building practices to vulnerability reduction: building resilience through existing resources, knowledge and know-how.” Procedia Economics and Finance, Vol. 18, pp. 932-939, Elsevier.
  • Islam, M.S., Nasrin, M. and Khan, A.J. (2013). “Foundation alternatives in dredge fill soils overlying organic clay.” Lowland Technology International Journal, International Association of Lowland Technology (IALT), Japan, Vol. 15, Issue No. 2, pp. 1-14.Q3
  • Islam, M.S., Shariar, B.A.M. and Hossain, M.S. (2013). “Study on growth of vetiver grass in tropical region for slope protection.” International Journal of GEOMATE, Geotech., Const., Mat., Env., Japan, Vol. 5(2), pp. 729-734.Q3
  • Islam, M.S., Arifuzzaman, Hossain, M.S. and Nasrin, S. (2013). “Effectiveness of vetiver root in embankment slope protection: Bangladesh perspective.” International Journal of Geotechnical Engineering, Vol. 7, Issue No. 2, pp. 136-148.Q2
  • Siddiquee, M.S.A., Islam, M.S., and Tatsuoka, F. (2013). “Development of a nonlinear model for soft rock and its applications.” Geotechnical and Geological Engineering, Vol. 31, Issue No. 2, pp.627-645.Q2
  • Islam, M.K., Cartar, J.P., Siddiquee, M.S.A. and Islam, M.S. (2013). “A method for derivation of consolidation equation and value of degradation exponent for structured soils.” Geotechnical and Geological Engineering, Vol. 1, Issue No. 5, pp. 1587-1601.Q2
  • Islam, M.S., Nasrin, S., Islam, M.S., and Moury, F.R. (2013). “Use of vegetation and geo-jute in erosion control of slopes in a sub-tropical climate.” International Journal of Civil and Environmental Engineering, World Academy of Science, Engineering and Technology (WASET), Vol. 7, Issue No. 1, pp. 54-62.Best Paper Award
  • Islam, M.S. and Hossain, M.S. (2013). “Reinforcing effect of vetiver (vetiveria zizanioides) root in geotechnical structures-experiments and analyses.” Geomechanics and Engineering, Vol. 5, Issue No. 4, pp. 313-329.Q2
  • Ahmed, M., Islam, M.S. and Ahsan, R. (2012). “Dynamic stiffness of laterally loaded pile foundation in Dhaka soil.” Electronic Journal of Geotechnical Engineering (EJGE), Vol. 17, pp. 2375-2397.
  • Islam, M.S. and Hoque, E. (2011). “Strength anisotropy in undisturbed Dhaka clay.” Journal of Geotechnical Engineering, a Journal of Bangladesh Society for Geotechnical Engineering, Bangladesh (BSGE), Vol. 1. Issue No. 1, pp.7-15.
  • Islam, M.S. and Iwashita, K. (2010). “Earthquake resistance of adobe reinforced by low cost traditional materials.” Journal of Natural Disaster Science, Japan Society for Natural Disaster and Science, Japan, Vol. 32, Issue No. 1, pp. 1-21.
  • Islam, M.S., Hossain, M.T., Ameen, S.F., Hoque, E. and Ahamed, S. (2010). “Earthquake induced liquefaction vulnerability of reclaimed areas of Dhaka.” Journal of Civil Engineering, The Institution of Engineers, Bangladesh (IEB), Vol. 38, Issue No. 1, pp.65-80.
  • Shibayama, T., Tajima, Y., Kakinuma, T., Nobuoka, H., Yasuda, T., Ahsan, R., Rahman, M. and Islam, M.S. (2008). “Field survey of storm surge disaster due to cyclone Sidr in Bangladesh.” Proceedings of Coastal Engineering, JSCE, Vol. 55, pp.1396-1400. (in Japanese, Abstract in English).
  • Islam, M.S., Siddique, A. and Muqtadir, A. (2004). “Mechanical properties of soft organic Dhaka clay.” Journal of Civil Engineering, The Institution of Engineers, Bangladesh (IEB), Vol. CE 32, Issue No. 2, pp. 143-161.
  • Islam, M.S. and Hoque, E. (2003). “Directional dependency of strength in compacted Dhaka clay.” Journal of Civil Engineering, The Institution of Engineers, Bangladesh (IEB), Vol. CE 31, Issue No. 1, pp. 25-35.

রেফারিড কনফারেন্স প্রসিডিংস 61

  • Nowrin, J.F. and Islam, M.S. (2026). “Pavement stabilization in Bangladesh: A review of conventional and emerging techniques.” Proc. of the 8th International Conference on Civil Engineering for Sustainable Development (ICCESD 2026), February 5-7, 2026, KUET, Khulna, Bangladesh, Paper No. 1231.
  • Islam, M.B., Paul, S., Sakib, M.M.N. and Islam, M.S. (2025). “Enhancing the sustainability and performance of compressed stabilized earth blocks with vetiver straw fiber and cement.” TERRA Education IV, July 2-4, 2024, Grenoble, France, pp. 290-300.
  • Badhon, F.F., Islam, M.A. and Islam, M.S. (2024). “Experimental evaluation of additional shear strength for vetiver root-reinforced soil.” Geo-Congress 2024, British Columbia, Canada, February 25-28, 2024, GSP351, pp. 207-217.
  • Islam, M.S., Sarker, D. (2024). “Effectiveness of vetiver grass in char land protection.” In: Bezzeghoud, M., et al. Recent Research on Geotechnical Engineering, Remote Sensing, Geophysics and Earthquake Seismology, MedGU 2022, Advances in Science, Technology & Innovation, Springer, Cham, November 27-30, 2022, Marrakech, Morocco.
  • Islam, M.S., Paul, S. and Iqbal, S.M. (2023). “Strength-ductility behavior of earthen block reinforced with vetiver shoot.” Smart Geotechnics for Smart Societies, Proc. of the 17th Asian Regional on Soil Mechanics and Geotechnical Engineering Conference (17ARC), Askar et al. (Eds.), August 14-18, 2023, Astana, Kazakhstan, pp. 2444-2448, CRC Press.
  • Islam, M.S. (2023). “Vetiver grass technology for infrastructure protection and disaster risk reduction- experience in local and global perspective.” The 7th International Conference on Vetiver (ICV-7): TVNI Infrastructure Protection and Disaster Mitigation, May 29-June 1, 2023, Chiang Mai, Thailand, Paper No. 34.Global Vetiver Champion Award
  • Islam, M.S. (2023). “Vetiver Grass Technology (VGT) for infrastructure protection, contamination remediation and disaster mitigation: influences and future visions.” The 7th International Conference on Vetiver (ICV-7): TVNI Infrastructure Protection and Disaster Mitigation, May 29-June 1, 2023, Chiang Mai, Thailand.Vetiver Network International Award on Infrastructure Protection and Disaster Mitigation
  • Islam, M.S. (2023). “Phytoremediation of contaminated land using vetiver (Chrysopogon zizanioides L.) in Bangladesh perspective.” The 7th International Conference on Vetiver (ICV-7): TVNI Infrastructure Protection and Disaster Mitigation, May 29-June 1, 2023, Chiang Mai, Thailand.
  • Paul, S., Sakib, M.M.N., Elahi, T.E. and Islam, M.S. (2022). “Suitability of agro-industrial wastes and soil in manufacturing strong and durable earthen block: a review.” Proc. of 5th Annual Paper Meet and 2nd Civil Engineering Congress, 2022, July 29, 2022, Dhaka, Bangladesh.Best Paper Award
  • Ihosan, M.F., Paul, A. and Islam, M.S. (2022). “Development of soil water characteristic curve for coarse-grained soil in comparison with mathematical model.” Proc. of 5th Annual Paper Meet and 2nd Civil Engineering Congress, 2022, July 29, 2022, Dhaka, Bangladesh.
  • Islam, M.S. and Badhan, F.F. (2020). “A mathematical model for shear strength prediction of rooted soil.” Geo-Congress 2020 GSP 316, February 25-28, 2020, Minnesota, USA, pp. 96-105.
  • Islam, M.A., Elahi, T.E. and Islam, M.S. (2020). “Effectiveness of vetiver grass on stabilizing hill slopes.” Geo-Congress 2020 GSP 316, February 25-28, 2020, Minnesota, USA, pp. 106-115.
  • Islam, M.S., Islam, J. and Mumtaz, M. (2019). “Construction of disaster resilient rural houses using CSEB made with river bed sand.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 198-201.Best Paper Award
  • Hossain, S., Islam, M.S. and Khan, A.J. (2019). “Effectiveness of open mesh jute geo-textile (JGT) in erosion control of slopes.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 163-167.
  • Sakib, S. and Islam, M.S. (2019). “Influence of phreatic surface on the ultimate pullout resistance of vertical anchor plate by FEM.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 148-153.
  • Hossain, A., Chowdhury, M.E. and Islam, M.S. (2019). “Evaluation of the effect of rainfall on slope stability analysis by using hydraulic unit flux infiltration property.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 159-162.
  • Badhon, F.F., Islam, M.S. and Al-Hussaini, T.M. (2019). “Study of root-reinforcement effect on shear strength parameters of soil obtained by direct shear tests.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 179-182.
  • Faruk, M.O., Islam, M.S., Hoque, M.Z. and Shorno, M.A. (2019). “Stabilization of dispersive soil by using fly ash.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 188-192.
  • Elahi, T.E., Islam, M.A. and Islam, M.S. (2019). “Effect of vegetation and nailing for prevention of landslides in Rangamati.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 193-197.
  • Mallick, J.R. and Islam, M.S. (2019). “Effect of salinity on the compressibility and permeability characteristics of a coastal soil from Bangladesh.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 202-205.
  • Alam, T., Barua, S., Anisa, H. and Islam, M.S. (2019). “Evaluation of infiltration rate from soil properties using artificial neural network.” Proc. of International Conference on Disaster Risk Management (ICDRM 2019), January 12-14, 2019, Dhaka, Bangladesh, pp. 144-147.
  • Islam, M.S., Islam, T. and Khatun, N. (2018). “Permeability characteristics of fly ash and lime treated soils.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 262-267.
  • Elahi, T.E., Islam, M.A. and Islam, M.S. (2018). “Stability analysis of selected hill slopes in Rangamati.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 307-312.
  • Rahman, M.R. and Islam, M.S. (2018). “Effect of ground water table on pullout capacity of anchor in frictional soil.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 331-336.
  • Ashraf, M. and Islam, M.S. (2018). “Experimental studies on the characteristic behavior of dispersive soil and stabilization with fly ash.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 325-330.
  • Sakib, S. and Islam, M.S. (2018). “Numerical investigation of pullout capacity of horizontally loaded vertical anchor plate embedded in cohesionless soil.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 319-324.
  • Islam, M.S., Shams, M.S. and Sultana, F. (2018). “Soil waste remediation using vetiver grass.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 349-354.
  • Islam, T. and Islam, M.S. (2018). “Estimation of pile bearing capacity using different methods.” Proc. of 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), December 19-21, 2018, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, pp. 362-367.
  • Islam, M.S. and Islam, M.A. (2018). “Reduction of landslide risk and water-logging using vegetation.” Proc. of International Conference on Civil and Environmental Engineering (ICCEE 2018), October 2-5, 2018, Kuala Lumpur, Malaysia, Vol. 65, Art. No. 06003.Best Presenter Award
  • Islam, M.S., Sarker, L., Islam, M.A., Islam, M.A. and Karim, R. (2016). “Consideration of soil properties for stability analyses of Padma and Jamuna River bank.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 197-202.
  • Islam, M.S., Hoque, M.S., Mallick, S., Parshi, F.N. and Rahman, A.K.M.L. (2016). “Climate resilient slope protection for coastal regions of Bangladesh using bio-engineering techniques.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 221-226.
  • Islam, M.S. and Badhon, F.F. (2016). “Characterization of soil-root system to determine stability of vegetated slopes.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 203-208.
  • Islam, M.S., Hossain, M.I., Islam, M.A., Shahriar, A.R. and Bose, B. (2016). “Construction of earthen houses using CSEB: Bangladesh perspective.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 215-220.
  • Tanzen, R., Sultana, T., Islam, M.S. and Khan, A.J. (2016). “Determination of plastic limit using Cone Penetrometer.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 209-214.
  • Islam, M.S., Uddin, M.M., Ahmed, M. and Khanum, M. (2016). “Cost effective foundation on problematic soil of reclaimed areas in Dhaka city.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 209-214.
  • Islam, M.S. and Sikder, D. (2016). “Heavy metal contamination assessment of the Buriganga riverbed sediments.” Proc. of 3rd International Conference on Advances in Civil Engineering 2016 (ICACE 2016), December 21-23, 2016, Cox’s Bazar, Bangladesh, pp. 209-214.
  • Hossain, N., Ahmed, S.S., Khan, A.J. and Islam, M.S. (2015). “Development of correlation between soaked and unsoaked CBR of Lean clay.” Proc. of First Int. Conference of Advances in Civil Infrastructure and Construction Materials (CCIM2015), December 14-15, 2015, Military Institute of Science and Technology (MIST), Dhaka, Bangladesh, Paper No. 51-23.
  • Islam, M.S. (2015). “Bioengineering techniques for slope protection, land reclamation and water purification in Bangladesh.” Proc. of Conference on Development and Democracy in Bangladesh: Problems and Prospects, November 6-8, 2015, UC Berkeley, California, USA, Paper No. 36.
  • Islam, M.S., Hossain, T.R., Moles, O., Podder, R.K., Caimi, A. and Parshi, F.N. (2015). “Disaster resilient rural house designs for different geographic regions of Bangladesh.” Proc. of Conference on Development and Democracy in Bangladesh: Problems and Prospects, November 6-8, 2015, UC Berkeley, California, USA, Paper No. 37.
  • Islam, M.S. (2015). “Application of vetiver (Vetiveria zizanioides) as a bio-technical slope protection measure–some success stories in Bangladesh.” Proc. of 6th International Conference on Vetiver (ICV6), May 5-8, 2015, Danang, Vietnam.The King of Thailand Vetiver Awards 2015’ and ‘The Vetiver Network International Award
  • Islam, M.S., Shahriar, B.A.M. and Parshi, F.N. (2014). “Bio-technical solution for dyke protection in saline zone of Bangladesh.” Proc. of the 2014 World Congress on Advances in Civil, Environmental and Materials Research (ACEM’14), August 24-28, 2014, South Korea, Paper ID: ES302-727, 16 pages.
  • Moles, O., Islam, M.S., Hossain, T.R. and Podder, R.K. (2013). “Improvement of vernacular housing for disaster prone areas in Bangladesh: a six year experience.” Proc. of Vernacular Heritage and Earthen Architecture: contributions for sustainable development, Correia, Carlos & Rocha (Eds), CRC Press, October 16-20, 2013, Vila Nova De Cerveira, Portugal, Taylor & Francis Group, London, ISBN 978-1-138-00083-4, pp. 683-688.
  • Islam, M.S. and Yasin, S.J.M. (2013). “Improvement of a clay deposit using prefabricated vertical drains and preloading: a case study.” Proc. of 18th International Conference on Soil Mechanics and Geotechnical Engineering, September 2-6, 2013, Paris, France, Paper No. 2920, pp. 2501-2504.
  • Siddique, M.S.A., Hoque, E. and Islam, M.S. (2012). “Case study of a bridge embankment failure at Kishoreganj, Bangladesh.” Proc. of Third International Conference on Construction in Developing Countries (ICCIDC-III): Advancing Civil, Architectural and Construction Engineering & Management, July 4-6, 2012, Bangkok, Thailand, Paper ID 89, pp. 661-667.
  • Islam, M.S., Nasrin, M. and Khan, A.J. (2011). “Foundation problems in dredge fill soils overlaying soft organic layer.” Proc. of 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, May 23-27, 2011, Hong Kong, China, Paper No. 5.
  • Islam, M.S., Arifuzzaman, Nasrin, S. and Islam, M.S. (2011). “Vetiver grass as a sustainable low-cost slope protection measure in Bangladesh.” Proc. of International Conference on Environmental Technology & Construction Engineering for Sustainable Development (ICETCESD-2011), March 10-12, 2011, SUST, Sylhet, Bangladesh, pp. 593-602.1st Prize Award
  • Islam, M.S., Ahmed, M., Hossain, M.T. and Nasrin, M. (2010). “Dynamic properties of Dhaka soils using microtremor data.” Proc. of Bangladesh Geotechnical Conference 2010: Natural Hazards and Countermeasures in Geotechnical Engineering, November 4-5, 2010, Dhaka, Bangladesh, pp. 329-335.
  • Islam, M.S., Arifuzzaman and Nasrin, S. (2010). “In-situ shear strength of vetiver grass rooted soil.” Proc. of Bangladesh Geotechnical Conference 2010: Natural Hazards and Countermeasures in Geotechnical Engineering, November 4-5, Dhaka, Bangladesh, pp. 274-279.
  • Islam, M.S. and Hossain, M.T. (2010). “Earthquake induced liquefaction potential of reclaimed areas of Dhaka city.” Proc. of the 2010 Geo Shanghai International Conference: Soil Dynamics and Earthquake Engineering (GSP 201) of ASCE, June 3-5, 2010, Shanghai, China, Vol. 375, No.40, pp. 326-331.
  • Yasin, S.J.M., Alam, M.J., Islam, M.S. and Siddique, A. (2009). “Static load capacity of RCC piles in soft clay-a case study.” Proc. of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, M. Hamza et al. (Eds.), October 5-9, 2009, Alexandria, Egypt, pp. 1325-1328.
  • Shibayama, T., Tajima. Y., Kakinuma, T., Nobuoka, H., Yasuda, T., Ahsan, R., Rahman, M. and Islam, M.S. (2009). “Field survey of storm surge disaster due to cyclone Sidr in Bangladesh.” Proc. of Coastal Dynamics 2009-Impacts of Human Activities on Dynamic Coastal Processes; 01/2009, September 7-11, 2009, Tokyo, Japan, Paper No. 129, pp. 1-8.
  • Islam, M.S. and Iwashita, K. (2009). “Seismic response of fiber-reinforced and stabilized adobe structures.” Proc. of the Getty Seismic Adobe Project 2006 Colloquium, The Getty Conservation Institute, Los Angeles, USA, April 11-13, 2006, pp. 11-22.
  • Islam, M.S. and Iwashita, K. (2009). “Performance investigation of fibre-earth composite as a building material.” Proc. of the Seventh International Conference on Composite Science and Technology (ICCST/7), January 20-22, 2009, American University of Sharjah, Sharjah, UAE, Paper No. 12200, 6 pages.
  • Islam, M.S. and Iwashita, K. (2008). “Seismic strengthening of adobe structures using low-cost materials.” Proc. of Terra 2008: The 10th International Conference on the Study and Conservation of Earthen Architectural Heritage, February 1-5, 2008, Bamako, Mali, pp. 283-289.
  • Islam, M.S. and Kanungo, M. (2007). “Use of waste materials to improve the seismic resistance of adobe.” Proc. of the 13th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, July 16-20, 2007, Margarita Island, Venezuela, Paper No. 248.
  • Siddiquee, M.S.A., Islam, M.S., Hoque, E. and Tatsuoka, F. (2005). “An isotropically hardening visco-elasto-plastic cyclic loading model.” Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE), September 12-16, 2005, Osaka, Japan, pp. 859-862.
  • Hoque, E., Islam, M.S. and Munshi, M.M.K. (2004). “Performance of preloading applied on a peaty clay deposit.” Proc. of GeoTrans 2004: Geotechnical Engineering for Transportation Projects (GSP 126) of ASCE, July 27-31, 2004, California, USA, Vol. 154, No. 194 (9 pages).
  • Siddique, A., Islam, M.S. and Hoque, A.M. (2004). “Characterization of dredged fill materials used for development of a domestic airport.” Engineering Practice and Performance of Soft Deposits, IS-OSAKA 2004, Japanese Geotechnical Society, June 2-4, 2004, Osaka, Japan, pp. 379-384.
  • Ishtiak, I., Hoque, E. and Islam, M.S. (2003). “Use of carbide lime as a potential stabilizing agent of a selected silty soil.” Proc. of the 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, August 4-8, 2003, Singapore, Edited by C.F. Leung, K.K. Phoon, Y.K. Chow, C.I. Tech and K.Y. Yong, Vol. 1, pp. 431-434.
  • Hoque, E. and Islam, M.S. (2000). “Anisotropy in strength of Dhaka-clay.” an International Conference on Geotechnical and Geological Engineering, GeoEng 2000, November 19-24, 2000, Melbourne, Australia, SNES 0083 (6 pages).
  • Hoque, E. and Islam, M.S. (1999). “Strength parameters of clay in slope.” 5th EEGS-ES Meeting, Slope and Embankment Stability, Landslides, September 6-9, 1999, Budapest, Hungary, Paper No. LSP-09.

কনফারেন্স ও সেমিনার পেপার 53

  • Progga, S.T. and Islam, M.S. (2020). “Treating water bodies of Dhaka city by Vetiver based phytoremediation.” Proc. of 10th IconSWM-CE20, International Conference on Sustainable Waste Management towards Circular Economy, December 2-7, 2020, West Bengal, India, pp. 192 (Abstract Book).
  • Islam, M.S., Islam, T., Hossain, S., Bhuiyan, M.S.R. and Islam, M.Z. (2020). “Bioengineered protection system for haor infrastructures.” Proc. of Intl. Conference on Earth and Environmental Sciences & Technology for Sustainable Development (ICEEST 2020), January 25-27, 2020, Dhaka, Bangladesh, Paper No. ICDRS-O-035, pp. 200-201.
  • Islam, M.S., Eva, E.J., Islam, T. and Mallick, S. (2020). “Embankment protection in high saline zone using bioengineering method.” Proc. of Intl. Conference on Earth and Environmental Sciences & Technology for Sustainable Development (ICEEST 2020), January 25-27, 2020, Dhaka, Bangladesh, Paper No. ICDRS-O-033, pp. 204-205.
  • Aziz, S., Islam, M.S. and Ahmed, M. (2020). “A model study to quantify soil erosion by artificially simulated rainfall and observe effectiveness of bio-engineering to reduce landslide risk in Chittagong Hill Tracts.” Proc. of Intl. Conference on Earth and Environmental Sciences & Technology for Sustainable Development (ICEEST 2020), January 25-27, 2020, Dhaka, Bangladesh, Paper No. ICDRS-O-005, pp. 154-156.
  • Islam, M.S. (2019). “River bank and char land protection using vetiver system: case studies in Bangladesh.” Special Conference on Delta Plan 2100 and Sustainable Development in Bangladesh, January 4-5, 2019, Dhaka, Bangladesh.
  • Chowdhury, M.E., Islam, M.A., Islam, M.S., Shahriar, M.S. and Alam, T. (2017). “Design, operation and performance evaluation of a portable perforated steel tray rainfall simulator.” 14th Global and Technology Conference, December 29-30, 2017, Dhaka, Bangladesh.Best Paper Award
  • Islam, M.S., Islam, T. and Hoque, E. (2017). “Anisotropy in hydraulic properties of soil for designing drainage system and stabilization of slope.” Proc. of International Conference on Disaster Risk Mitigation (ICDRM2017), September 23-24, 2017, Dhaka, Bangladesh, Paper No. CDW153.
  • Islam, M.A., Islam, M.S. and Islam, T. (2017). “Landslides in Chittagong hill tracts and possible measures.” Proc. of International Conference on Disaster Risk Mitigation (ICDRM2017), September 23-24, 2017, Dhaka, Bangladesh, Paper No. CDW154.
  • Islam, M.S. and Badhan, F.F. (2017). “Sandy slope stabilization using vegetation.” Proc. of International Conference on Disaster Risk Mitigation (ICDRM2017), September 23-24, 2017, Dhaka, Bangladesh, Paper No. CDW156.
  • Islam, M.S., Hoque, M.S., Mallick, S., Parshi, F.N. and Islam, T. (2017). “Performance evaluation of bio-engineering in slope protection for different soils.” Proc. of International Conference on Disaster Risk Mitigation (ICDRM2017), September 23-24, 2017, Dhaka, Bangladesh, Paper No. CDW157.
  • Islam, M.S., Khan, A.J. and Siddique, A. (2016). “Effectiveness of treated jute geo-textiles (JGT) in river bank protection.” Proc. of International Seminar on Development and Application of Potentially Important Jute Geo-textiles (CFC/lJG/21), June 22-23, 2016, New Delhi, India.
  • Siddique, A., Khan, A.J. and Islam, M.S. (2016). “Performance of jute geotextiles for subgrade improvement in rural roads of Bangladesh.” Proc. of International Seminar on Development and Application of Potentially Important Jute Geo-textiles (CFC/lJG/2, 1), June 22-23, 2016, New Delhi, India.
  • Islam, M.S., Arif, M.Z.U., Badhon, F.F., Mallick, S. and Islam, T. (2016). “Investigation of vetiver root growth in sandy soil.” Proc. of BUET-ANWAR ISPAT 1st Bangladesh Civil Engineering SUMMIT, November 23-26, 2016, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh, pp. GE62-GE69.
  • Islam, M.S., Siddique, A.B., Islam, F. and Mallick, S. (2016). “Arsenic problem in soil: a geo-environmental solution.” Proc. of BUET-ANWAR ISPAT 1st Bangladesh Civil Engineering SUMMIT, November 23-26, 2016, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh, pp. GE55-GE61.
  • Islam, M.S., Salma, U., Shuvo, M.R. and Tanzen, R. (2016). “Study on river bank failure due to seepage.” Proc. of BUET-ANWAR ISPAT 1st Bangladesh Civil Engineering SUMMIT November 23-26, 2016, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh, pp. GE70-GE76.
  • Abedin, M.J. and Islam, M.S. (2015). “Sustainable approach for slope protection through eco-engineering with Vetiver (Vetiveria zizanioides).” Journal of Roads and Highways Engineers Association, JANAPATH, Special Issue November 2015, Sarak-O-Janapath Prakoushuli Samity, Bangladesh, pp. 69-77.
  • Islam, M.S. (2015). “Bio-engineering techniques for slope protection and land reclamation in Bangladesh.” Seminar Proceedings of Annual Convention 2015, November 12-14, 2015, Dhaka, Bangladesh, Roads and Highways Engineers Association, Haque, Sharika, Joarder (eds.), pp. 14-16.
  • Islam, M.S., Khan, A.J., Siddique, A., Kabir, R. and Nasrin, S. (2014). “Performance evaluation of river bank protection using jute geotextiles.” National Seminar on Jute Geo-textiles, April 1, 2014, Jute Diversification Promotion Centre (JDPC), Dhaka, Bangladesh, pp. 35-48.
  • Khan, A.J., Islam, M.S., and Islam, S.S. (2014). “Interaction behaviour of soil-jute geotextile.” National Seminar on Jute Geo-textiles, April 1, 2014, Jute Diversification Promotion Centre (JDPC), Dhaka, Bangladesh, pp. 97-107.
  • Khan, A.J., Siddique, A., Islam, M.S., Hossain, A. and Nasrin, S. (2014). “Efficacy of jute geotextiles as sub-grade reinforcement for rural road construction in Bangladesh.” National Seminar on Jute Geo-textiles, April 1, 2014, Jute Diversification Promotion Centre (JDPC), Dhaka, Bangladesh, pp. 11-26.
  • Islam, M.S., Khan, A.J., Siddique, A., Saleh, A.M. and Nasrin, S. (2014). “Control of erosion of hill slope top soil using geo-jute and vegetation.” National Seminar on Jute Geotextiles, April 1, 2014, Jute Diversification Promotion Centre (JDPC), Dhaka, Bangladesh, pp. 27-34.
  • Podder, R.K., Caimi, A., Moles, O., Islam, M.S. and Hossain, T.R. (2014). “From local building practices to vulnerability reduction: building resilience through existing resources, knowledge and know-how.” International Conference, UNESCO Chair in Technologies for Development: What is Essential? TEC4DEV2014, June 4-6, 2014, Lausanne, Switzerland (poster).
  • Islam, M.S., Hossain, T.R., Moles, O., Gomes, J.F. and Podder, R.K. (2013). “Development of disaster resistant housing in Bangladesh considering social and cultural issues.” Seminar on Disaster Resistant Building Cultures: The Ways Forward, May 27-29, 2013, Grenoble, France.
  • Islam, M.S., Khan, A.J., Siddique, A. and Abedin, Z. (2013). “Findings of field trial and simulation studies of Bangladesh Part: Development & Application of Potentially Important Jute Geotextiles.” National Seminar on Jute Geotextiles, September 19, 2013, Kolkata, India, pp. 97-108.
  • Bhuiyan, M.Z.I., Islam, M.S., Kayser, M.F.A. and Rahman, M.M. (2012). “Performance of adobe blocks randomly reinforced with natural fibers.” Proc. of the 1st International Conference on Civil Engineering for Sustainable Development (ICCESD-2012), March 23-24, 2012, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh, pp. 225-226.
  • Islam, M.S., Hossain, T.R. and Moles, O. (2012). “Disaster resistant affordable housing in different geographic regions of Bangladesh.” International Symposium on ‘Science for Society’, February 24-25, 2012, Dhaka, Bangladesh, Abstract Book, pp. 66.
  • Islam, M.S. and Iwashita, K. (2011). “Fiber reinforced composite soil as an earthquake resistant building material.” Proc. of Sixth International Earth Building Conference, Earth USA 2011, September 30-October 2, 2011, New Mexico, USA, pp. 182-189 (ISBN 978-0-9824660-2-5).
  • Islam, M.S. and Arifuzzaman (2010). “Performance of vetiver grass in protecting embankments on the Bangladesh coast against cyclonic tidal surge.” Proc. of 5th National Conference on Coastal and Estuarine Habitat Restoration, November 13-17, 2010, Texas, USA.
  • Islam, M.S. (2010). “Present status and problems of earthen architecture in Bangladesh: role of education.” Proc. of the Seminar TERRAEducation 2010, May 24-29, 2010, Grenoble, France, pp. 176-184.
  • Islam, M.S. and Rahman, M.M. (2010). “Strength and ductility characteristics of jute fibre reinforced earthen block-mortar system.” Proc. of the 3rd International Earthquake Symposium (IESB-3), March 5-6, 2010, Dhaka, Bangladesh, pp. 41-48.
  • Islam, M.S. and Nasrin, M. (2009). “Characteristics of soft organic soil underlying dredge fills in reclaimed areas of Dhaka.” Proc. of the Bangladesh Geotechnical Conference 2009 (BGC 2009), December 17, 2009, Dhaka, Bangladesh, pp.127-132.
  • Rahman, M.M. and Islam, M.S. (2009). “Use of jute fiber for earthquake resistant earthen house construction.” Proc. of the Bangladesh Geotechnical Conference 2009 (BGC 2009), December 17, 2009, Dhaka, Bangladesh, pp.190-196.
  • Hossain, M.T. and Islam, M.S. (2009). “Estimation of liquefaction potential of reclaimed areas of Dhaka based on shear wave velocity.” Proc. of the Bangladesh Geotechnical Conference 2009 (BGC 2009), December 17, 2009, Dhaka, Bangladesh, pp. 250-256.
  • Islam, M.S. and Hoque, N. (2009). “Earthen housing for better adaptation to climate change in Bangladesh.” Proc. of the Conference on Climate Change Impacts and Adaptation Strategies for Bangladesh, February 18-20, 2009, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh pp. 267-277.
  • Islam, M.S., Iwashita, K. and Rahman, M.M. (2008). “Performance of natural fiber reinforced soil in earthen houses.” Proc. of 6th Asian Young Geotechnical Engineers Conference (6th AYGEC-2008), December 20-21, 2008, Bangalore, India, pp. 258-267.Certificate of Appreciation
  • Islam, M.S., Ahamed, S., Hoque, E. and Ameen, S.F. (2007). “Liquefaction vulnerability of reclaimed areas of Dhaka city.” Proc. of the 2nd International Earthquake Symposium, Bangladesh (IESB-2), Bangladesh Earthquake Society, December 11, 2007, Dhaka, Bangladesh, pp. 103-112.
  • Islam, M.S. and Iwashita, K. (2007). “Seismic performance of jute and bamboo reinforced adobe structures.” Proc. of the 62nd Annual Conference of the Japan Society of Civil Engineers, September 12-14, 2007, Hiroshima, Japan, Paper ID: 1-253., pp. 501-502.
  • Tsuda, N., Kato, H., Islam, M.S. and Iwashita, K. (2007). “Seismic performance of adobe structures evaluated with shaking table tests.” Proc. of the joint seminar on New Technologies for Infrastructure Development and Protection, March 28-29, 2007, Thailand, pp. 87-92.
  • Islam, M.S., Honda, K. and Iwashita, K. (2006). “Earthquake resistance of fiber reinforced adobe.” Proc. of the 61st Annual conference of the Japan Society of Civil Engineers, September 20-22, 2006, Tokyo, Japan, Paper No. 1-663, pp. 1323-1324.
  • Islam, M.S., Honda, K. and Iwashita, K. (2006). “Improvement of seismic resistance of adobe structures.” Proc. of the First European Conference on Earthquake Engineering and Seismology, September 3-8, 2006, Geneva, Switzerland, Paper No. 146 (10 pages).
  • Islam, M.S., Siddiquee, A. and Tatsuoka, F. (2005). “A nonlinear model for soft rock and its application in bridge pier settlement calculation.” Proc. of the Japan-Bangladesh Joint Seminar on Advances in Bridge Engineering, August 10, 2005, Dhaka, Bangladesh, pp. 37-53.
  • Islam, M.S., Shah, A., Haroon, R. Sk. and Salekin, S. (2005). “Stabilization of soft organic soils using carbide lime.” Proc. of the 6th International Conference on Ground Improvement Techniques, July 18-19, 2005, Coimbra, Portugal, pp. 325-332.
  • Islam, M.S. and Ahamed, S. (2005). “Liquefaction potential of selected reclaimed areas of Dhaka city.” Proc. of the Third Annual Paper Meet and International Conference on Civil Engineering, March 9-11, 2005, The Institution of Engineers, Bangladesh (IEB), Dhaka, Bangladesh, pp. 341-350.
  • Islam, M.S. and Watanabe, H. (2004). “Dynamic properties of straw fiber reinforced and gypsum–stabilized adobe.” Proc. of the 15th Southeast Asian Geotechnical Society Conference, 15th SEAGC, November 22-26, 2004, Bangkok, Thailand, Vol. 1, pp. 959-964.
  • Islam, M.S. and Watanabe, H. (2004). “FEM simulation of seismic behaviour of adobe structures.” Proc. of the 13th World Conference on Earthquake Engineering, August 1-6, 2004, British Columbia, Canada, Paper No. 1310 (14 pages).
  • Islam, M.S. (2004). “Constitutive models for shear modulus of adobe.” Proc. of the 5th Asian Young Geotechnical Engineers Conference, June 14-16, 2004, Taipei, Taiwan, pp. 137-142.Best Paper Award
  • Islam, M.S., Hoque, E. and Munshi, M.M.K. (2003). “Geotechnical characteristics of a peaty soil in Bangladesh.” Proc. of the 2nd International Conference on Advances in Soft Soil Engineering and Technology, July 2-4, 2003, Putrajaya, Malaysia, pp. 67-78.
  • Islam, M.S., Siddique, A. and Muqtadir, A. (2003). “Geotechnical properties of soft organic clays of Dhaka.” Proc. of the 2nd International Conference on Advances in Soft Soil Engineering and Technology, July 2-4, 2003, Putrajaya, Malaysia, pp. 103-116.
  • Islam, M.S. and Watanabe, H. (2002). “Shear moduli of straw fiber reinforced adobe.” Proc. of the 57th Annual Conference of Japan Society of Civil Engineers, September 25-27, 2002, Hokkaido, Japan, Paper No. I-773, pp. 1545-1546.
  • Islam, M.S. and Watanabe, H. (2002). “Shaking table tests to study seismic behavior of straw fiber reinforced adobe models.” Proc. of the 4th International Summer Symposium, Japan Society of Civil Engineers, August 3, 2002, Kyoto, Japan, pp. 111-114.
  • Islam, M.S. and Watanabe, H. (2002). “Studies on historical adobe materials for improved seismic performance.” Proc. of the Structural Dynamics, EURODYN2002, September 2-5, 2002, Munich, Germany, Vol. 2, pp. 1505-1510.
  • Islam, M.S. and Watanabe, H. (2001). “Low cost earthquake resistant reinforcement for adobe houses.” Proc. of the Third International Conference on Earthquake Resistant Engineering Structures, ERES 2001, September 4-6, 2001, Malaga, Spain, pp. 755-764.
  • Islam, M.S., Watanabe, H. and Sato, M. (2001). “Reinforcement of adobe (sun-dried brick) by straw.” Proc. of the 56th Annual Conference of the Japan Society of Civil Engineers, October 2-4, 2001, Kumamoto, Japan, Paper No. I-B100., pp. 200-201.Excellent Presentation Award

ডিজাইন ম্যানুয়াল ও নির্দেশিকা 5

  • Islam, M.S. and Hossain, T.R. (2017). “Development of Disaster Resilient Affordable House Design for Different Geographic Regions of Bangladesh.” Department of Civil Engineering, BRTC, BUET (this design manual contains 35 designs of affordable rural houses for 8 different geographic regions of Bangladesh which are useful for designing rural house in different disaster-prone areas).
  • Bureau of Research, Testing and Consultation, BRTC (2019). “Assessment of Road Design and Pavement Standard of Local Government Engineering Department (LGED).” Second Rural Transport Improvement Project [Dr. Islam contributed in developing the Section on slope protection and ground improvement design].
  • Islam, M.S. (2015). “Guidelines for Embankment Protection using Vetiver and Geo-jute (JGT).” Department of Civil Engineering, BUET, Dhaka, Bangladesh.
  • Sadeque, A.S., Tsukamoto, S., Ahsan, R., Rahman, M.M. and Islam, M.S. (2008). “Construction Manual on Shelters for Cyclone-Prone Coastal Areas of Bangladesh.” a Joint Project by Engineers Without Borders, Japan (EWBJ), BUET and Disaster Management Bureau, Bangladesh funded by Japan Platform.
  • Tsukamoto, S., Ahsan, R., Rahman, M.M. and Islam, M.S. (2008). “Guidelines for Restoration of Roads and Embankments (Part A) and Construction of Coastal Community Building (Part B).” a Joint Project by Engineers Without Borders, Japan (EWBJ), BUET and Disaster Management Bureau, Bangladesh funded by Japan Platform.

নির্বাচিত প্রতিবেদন 16

বুয়েটের বিআরটিসি ও রাইজের মাধ্যমে পরামর্শ ও গবেষণা প্রকল্পের জন্য প্রফেসর ইসলাম ৫০টিরও বেশি প্রতিবেদন লিখেছেন। এখানে বাছাই করা কয়েকটি দেওয়া হলো।

  • Islam, M.S., Aninda, S.S.A., Paul, S., Sakib, M.M.N., Progga, S.T., and Ananna, A.N. (2026). “Final Report for the Development of a Bangladesh Standard (BDS) for Compressed Stabilized Earth Block (CSEB).” funded by Bangladesh Standards and Testing Institution (BSTI), Bangladesh.
  • Islam, M.S. (2023). “Final Design Schemes for Application of Bioengineering at Proposed Trans South-South Java Road Project.” Proposed Trans South-South Java Road Project (56017-001), funded by Asian Development Bank (ADB) to be implemented by DGH, Indonesia.
  • Islam, M.S. (2023). “Report on Fact-Finding Mission to South Java, Indonesia (12-15 July, 2023).” Proposed Trans South-South Java Road Project (56017-001), funded by Asian Development Bank (ADB) to be implemented by DGH, Indonesia.
  • Islam, M.S. (2022). “Application of Vetiver-Based Bioengineered Slope Protection in LOGIC infrastructure.” Local Government Initiative on Climate Change (LoGIC), funded by United Nations Capital Development Fund (UNCDF), United Nations Development Programme (UNDP), European Union (EU) and Sweden, implemented by Local Government Division (LGD), Bangladesh.
  • Islam, M.S., Hossain, T.R. and Progga, S.T. (2022). “Report on Phase-I of Sustainable Solution on Operation & Maintenance (O&M) of Multi-purpose Disaster Shelters (MPDS).” Sustainable Solution on Operation & Maintenance (O&M) of Multi-purpose Disaster Shelters (MPDS) project funded by Catholic Relief Services (CRS), implemented by CARITAS Bangladesh.
  • Islam, M.S. (2020). “Vetiver Based Bio-engineered Slope Protection and Liquid Soil Catalyst Agents to Improve Soil Bearing Capacity: NR23 and PR312.” TA-9631: Southeast Asia Transport Project Preparatory Facility, project funded by Asian Development Bank (ADB) to be implemented by Ministry of Public Works and Transport (MPWT), Cambodia.
  • Islam, M.S. (2020). “Monitoring the Performance of Village Protection, Model Village, Upazila/Union Road, Slope Protection.” Haor Infrastructure Livelihood Improvement Project (HILIP), project funded by International Fund for Agricultural Development (IFAD) and implemented by Local Government Engineering Department (LGED), GoB, Bangladesh.
  • Islam, M.S. and Hoque, M.S. (2018). “Eco-slope Protection and Intervention at North-West Flood Prone Region.” project funded by United Nations Development Programme (UNDP) and implemented by Eco-Social Development Organization (ESDO), Bangladesh.
  • Islam, M.S. and Hoque, M.S. (2016). “Report on Investigation of Climate Resilient Slope Protection.” Investigation of Climate Resilient Slope Protection of Embankments under Coastal Climate Resilient Infrastructure Project (CCRIP), funded by International Fund for Agricultural Development (IFAD) implemented by Local Government Engineering Department (LGED), Bangladesh.
  • Abedin, Z., Siddique, A., Khan, A.J., and Islam, M.S. (2010). “Technical Report on Activities of Bangladesh Part for the Development and Application of Potentially Important Jute Geotextile Project (CFC/IJSG/21 Project).” Technical Report Nos. 1, 2, 3 & 4, project funded by Common Fund for Commodities, The Netherlands and implemented by the Jute Diversification Promotion Centre (JDPC), Dhaka, Bangladesh.
  • Islam, M.S. and Hossain, T.R. (2012). “Design of Low-cost Houses for Cyclone and Flood Affected Areas of Bangladesh.” Department of Civil Engineering, Bureau of Research Testing and Consultation (BRTC) (No. 002943/09-10/CE), BUET, Dhaka, Bangladesh.
  • Hoque, M.S. and Islam, M.S. (2013). “Review of Village Protection Works and Prospects of Vetiver Grass Technology.” Local Government Engineering Department (LGED), GoB, Bangladesh.
  • Islam, M.S. and Hoque, E. (2008). “Report on Analysis of Liquefaction Potential for Sub-soils and Slope Stability Analyses of Tongi-Bhairab Rail Link Section.” Department of Civil Engineering, Bureau of Research Testing and Consultation (BRTC), BUET, Bangladesh.
  • Islam, M.S. (2007). “Research on Earthquake Resistant Reinforcement of Adobe Structures.” Final Research Report, Japan Society for the Promotion of Science (JSPS), 3 pages.
  • Das, A., Islam, M.S., Alam, M.J. and Hoque, N. (2007). “Housing Report on Mud House of Bangladesh.” World Housing Encyclopaedia, Earthquake Engineering Research Institute (EERI) and International Association for Earthquake Engineering (IAEE), Report No. 143.
  • Siddique, A., Ali, M.H., Islam, M.S. and Islam, M.M. (1999). “Final Report on Performance Evaluation of Rajshahi Town Protection Embankment during 1998 Floods.” Department of Civil Engineering, Bureau of Research Testing and Consultation (BRTC), BUET, Dhaka, Bangladesh, 77 pages.